Canadian Orders: Flat-Rate Shipping on Orders over $75 | Orders Over $150 Ship Free!

Liquid error: Argument error in tag 'include' - Illegal template name
 

Timber Pro Clean and Brite

**THIS PRODUCT IS NOT ELIGIBLE FOR FREE SHIPPING** 
Please contact for shipping rates

 

Timber Pro Clean and Brite cleans and brightens all exterior wood, siding, logs, decks and fences. It is also good for exterior concrete, stone and masonry surfaces.

Specially formulated professional strength, it will remove tannin stains, dirt, mild greying, and envirionmental dirt from new wood. After cleaning with Clean and Brite, the wood surface is ready for finishing. Clean and Brite is also an excellent cleaner to keep your exterior coatings looking like the day they were applied and is safe to use on exterior finishes in good condition. 

Features:

  • PROFESSIONAL CLEANING STRENGTH: can be used to clean wood surfaces from tannin stains, mould, mildew and even mild greying. 
  • VERSATILE: can be used on exterior wood surfaces as well as concrete, stone and masonry.
  • SAFE FOR EXISTING FINISHES: CLEAN+BRITE can be used to safely clean exterior wood surfaces, removing dirt, mould, greying and environmental pollution.
  • EASY TO USE: CLEAN+BRITE can be applied easily with a low-pressure garden pump sprayer and easily rinsed off with a garden hose after its activation period. 
  • All exterior wood, siding, logs, decks and fences
  • All exterior concrete, stone and masonry surfaces

Where to use: Use Timber Pro CLEAN+BRITE for cleaning UV damage and dirt on wood surfaces. For best results, agitate lightly with a medium-bristle brush. If there are areas that are extra dirty, apply more CLEAN+BRITE. Once the product has been allowed to work for 30 minutes and agitated, thoroughly wash down the surface with clean water using a garden nozzle. If power washing, do not exceed 1000-1200 psi and keep nozzle four feet from wood surface. Note: Rinse end grain such as log ends, corners, and any cracks or checks thoroughly. If a reapplication is necessary follow the same steps.

Application: 
  • Application is best with spray and brush.
  • Dampen wood surface prior to application.
  • Application on New and Untreated Wood Surface; apply a generous amount diluted 1:1 with water.
  • Application on Previously Stained Wood Surface; apply a generous amount diluted 1:1 with water.
  • Application on Old Wood Surface; apply a generous amount without dilution.
  • Spray all surrounding vegetation before and after use with water.
  • Keep CLEAN+BRITE moist during the 30-minute activation period.
Coverage:
Smooth wood: 250-300 square feet per gallon.
Rough wood: 150-200 square feet per gallon.
Hardwoods: 300-350 square feet per gallon.
Note: Coverage will vary with the porosity of the wood.

Related Items